Hi mwholderby,
Change the transmission start speed if you are experiencing a transmission problem with the fax.
- How to access the option
[ 
] (Menu) -> <System Settings> -> <Communication Management Settings> -> <Fax Settings> -> <TX Start Speed>
- Settings
33600 bps (Default setting), 14400 bps, 9600 bps, 7200 bps, 4800 bps, 2400 bps
Basic Procedures for Sending Faxes
Solution
1. Place your fax.
2. Press [
].
3. Specify the scanning settings as needed.
4. Specify the destination.
Specify destinations in the following ways.
- by entering the fax number
- by selecting a one-touch key
- by selecting a coded dial code
- by selecting a group address
- from the Address bok
- under sequential broadcasting
5. Press [
] (Start).
When your fax is placed in the feeder
The scan starts. Your fax is sent to the destination when the scan is complete.When your fax is placed on the platen glass
Perform the following procedure.
- Select the size of the original document using [
] or [
] and press [OK].
- Place the next page on the platen glass and press [
] (Start). Press [
] (Start) for each page.
- When all documents are scanned are scanned completely, select <Start Sending> using [
] or [
] and press [OK].
Your fax is sent to your fax destination
