Re: 8280 cw won't print envelopes
Size 6 envelopes... It finally worked... When I click on "file" and then "print", it doesn't print...however, when I clicked on the "quick print" icon, it printed. Next issue I'm running into now is...
View ArticleMF227dw No Longer Scans??
All of a sudden, my MF227 has stopped scanning. If you open the Toolbox and press "scan", nothing happens. I have removed all the Canon software and reinstalled everything including the recent firmware...
View ArticleiR ADV-C250/C350
Since upgrading to Windows 10 Enterprise, all users printing to this device are unable to print single-sided. All jobs tested from MS Excel, PowerPoint, PDFs printed duplex when single sided was...
View ArticleiWMC 1000 devices
Hello, The limitation of 1000 devices in iWMC can be resolved somehow? We are installing new printers and in this moment we already passed the limit. Thanks
View ArticleRe: iWMC 1000 devices
Hi, Gytrox! Thanks for posting!While our forum community members are welcome to chime in, Canon does not provide direct support for imageRUNNER series products and their related utlities. Instead, your...
View ArticleRe: Fax setup
In answer to our guestions:1. I believe it is a "plain old phone line". We have to have a phone line for our DSL internet.2. Yes3. Dedicated fax line.4. No there is no dial tone. The light in the...
View ArticleRe: Fax setup
Hello mwholderby, Since there isn't a dial tone when you press the HOOK button, your MF5950dw may require service. I recommend you call our Desktop Printing and Imaging Solutions Group at...
View ArticleRe: MF Toolbox doesn't work on Windows 10
I was looking up a problem for my MG5420 and I noticed that this thread on the MF4150 is still going strong.It is amazing that Canon software experts can't solve this problem. My MF4150 still stops...
View ArticleRe: MF Toolbox doesn't work on Windows 10
Hi al1, There is a recommended patch to install if you are having issues scanning after upgrading to Windows 10 for the imageCLASS MF4150.Let's perform the following steps to download and install the...
View ArticleRe: MF Toolbox doesn't work on Windows 10
Does your fix apply to the MF4370DN I-SENSYS printer also?
View ArticleRe: Error message code B504
My Canon MB2320 will not allow me to replace the ink cartridge. I open the front but the cartridges will not come to the middle where I can extract and replace. What's the problem?
View ArticleRe: MF Toolbox doesn't work on Windows 10
Hello gnocchi, The fix only applies to Canon USA printers. i-SENSYS printers are not sold in the United States. For information and troubleshooting assistance, please visit http://www.canon.com and...
View ArticleRe: MF Toolbox doesn't work on Windows 10
" Note: If Microsoft had an update it may be necesarry to rerun the scanning patch again." Why??? I have no other software that requires being "repatched" everytime Windows updates. Those Windows...
View ArticleRe: Canon MF4800 - Prints first page twice
Hi patrice, sorry to reply to this so far on I have the same problem that david had two years ago (except that my canon is MF4700)If you could answer me it would be very helpful 1)A working group, 3...
View ArticleRe: MF Toolbox doesn't work on Windows 10
Hi IslandTractor, We said it "may" be necessary to rerun the scanning patch again. If your operating system updates and you are able to scan, then you do not need to run the patch again. However, if...
View ArticleClik here to view.
Re: Canon MF4800 - Prints first page twice
Hello Victor97, It sounds like you have our imageCLASS MF4770n (the model number appears near your LCD screen on your printer) and you are sharing the printer. Printer sharing is when you directly...
View ArticleRe: Cannot communicate with scanner. Cable may be disconnected or scanner may...
Having the same issue, but I have a canoscan 8400f attach to a Mac 10.9.5. It has been working all these years and today it just won't connect or communicate. Have turned on and off the scanner....
View ArticleRe: Cannot communicate with scanner. Cable may be disconnected or scanner may...
Have a Canoscan 8400f and a Mac 10.9.5. Everything was fine until "it cannot communicate with scanner." Rebooted the computer, turned on and off the scanner, checked all the connections nd still...
View ArticleRe: MF Toolbox doesn't work on Windows 10
Please note: When I did reinstall the Toolbox app and the drivers for the Canon MF4150 printer, Windows crashed (actually it suddenly reboots). "Your PC ran into a problem and needs to restart. We're...
View ArticleRe: MF Toolbox doesn't work on Windows 10
Hi James,Entered MF4150 but did not get the sequence you mentioned. Also note that this patch is not available at the canon.ca - website under drivers and support, therefore I missed it. At the...
View Article